Licensed & Insured, in Chattanooga and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Chattanooga
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (423) 275-2115 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Chattanooga and surrounding areas · On-site visits included · Free estimate within 24h
Chattanooga Metal Roofing is a team of local certified professionals based in Chattanooga. We respond quickly in Chattanooga and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (423) 275-2115⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews
“We needed a metal roof on our hay and equipment barn out past Ooltewah and these guys handled the whole thing, about 4,000 square feet of ribbed panel. Crew of four knocked it out in three days and swept the gravel clean of every last screw and scrap. The building inspector actually complimented the flashing work, which I've never seen before.”
Commercial Metal Roofing
“Our Victorian's porch roof was a mess of old shingles and I was dreading a full tear-off. They did a retrofit right over the existing deck, matched the standing seam profile to the main house, and finished in two days flat. Honestly relieved we didn't have to gut the whole thing.”
Metal Roof Over Shingles (Retrofit)
“The old barn on our farm had a rusted-through roof that was leaking onto the hay bales every time it rained. Chattanooga Metal Roofing tore it off and put down new corrugated panels with proper snow guards, and they even reworked the gutters so runoff stops pooling at the doors. Two months in and not a single drip. Grateful is an understatement.”
Metal Roof Replacement
“We were building a timber-frame house and wanted a standing seam roof that would actually do the house justice. The crew was meticulous, especially around the ridge and valleys, and they coordinated with our builder without any hand-holding from me. It took about a week and the finished roof looks incredible against the wood siding.”
Standing Seam Metal Roofing
“Had a stubborn leak where my vent pipe comes through the metal roof and two other outfits couldn't figure it out. These guys found the failed boot and bad flashing in about ten minutes, fixed it properly, and charged a fair price. Small job but they treated it like it mattered.”
Metal Roof Leak Repair
“New metal roof on our house, roughly 2,200 square feet, and the whole thing went smoother than I expected. They gave us a clear timeline upfront, showed up when they said they would, and the cleanup was spotless, they even ran a magnet over the driveway. Only gripe is the schedule slipped a couple days after a rain delay, but they kept us posted the whole time. Would use them again.”
Metal Roof Installation
“Our modern house sits up on the ridge with a valley view and we went with stone-coated steel to get the look without the maintenance headaches. The installers clearly knew the product, seams and trim are crisp, and they walked me through the warranty before they left. Six weeks in and it's already survived a decent windstorm without a rattle.”
Stone-Coated Steel Roofing
“We're building a stone house overlooking the river and had them come out for a metal roof inspection before we finalized our plans. The report was thorough and honest, they flagged a flashing detail our builder had missed and gave us options without any pressure to upsell. Took a few days longer than promised to get the written report back, but the advice alone saved us a headache down the road.”
Metal Roof InspectionReal photos of our work in Chattanooga · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, concealed fasteners, and wind-rated trim for a standard gable roof. |
| Exposed-fastener panel installation | Starting at $7/sq ft | Corrugated or ribbed panels with face fastening, best for barns, cabins, and simpler roof shapes. |
| Stone-coated steel or metal shingle installation | Starting at $9/sq ft | Textured or stamped profiles for historic and HOA homes, priced by panel style and trim complexity. |
| Complex or steep-pitch job | On estimate | Steep mountain lots, cut-up rooflines, and heavy flashing work need an on-site look before pricing. |
| Travel | Included | in Chattanooga and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment, concealed clips, roll-formed panels, and standard trim on a straightforward roof |
| Standing seam, complex or steep roof | Starting at $14/sq ft | Covers multiple valleys, dormers, steep pitch, and the staging time those features add |
| Snap-lock standing seam | Starting at $9/sq ft | Concealed fasteners without mechanical seaming, suited to simple gable geometry |
| Full tear-off and deck repair | On estimate | Priced after we open the roof and see sheathing condition, since 1910s decks vary widely |
| Flashing, chimney, and skylight detailing | On estimate | Quoted per penetration because count and condition drive the labor |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off with exposed-fastener panels | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and corrugated or ribbed panels with washered fasteners. |
| Full tear-off with standing seam | Starting at $13/sq ft | Concealed-fastener panels with new flashing, best for primary homes on the ridges and river flats. |
| Metal shingles or stone-coated steel | Starting at $12/sq ft | Stamped or granulated panels for historic and HOA homes that need a specific look. |
| Complex or large-scale job | On estimate | Steep pitches, wooded access, multiple roof planes, or heavy deck repair need an on-site look first. |
| Travel | Included | Covered in Chattanooga and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel retrofit | Starting at $7/sq ft | Includes underlayment, gasketed screws, and basic flashing; layer count and deck condition move the price. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels over underlayment or purlins; roof pitch and panel width drive the upcharge. |
| Retrofit with deck repair | On estimate | Rotted sheathing, spaced boards, or over-limit layers need an on-site look before we quote a number. |
| Steep or cut-up roof | On estimate | Dormers, valleys, and limited staging on Lookout Mountain and Signal Mountain add labor and access time. |
| Travel | Included | in Chattanooga and surrounding Hamilton County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (423) 275-2115, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (panel, flashing, or seam) | Starting at $450 | Covers a single-panel or flashing repair, with roof pitch and access the main cost drivers |
| Storm damage repair | Starting at $850 | Includes panel replacement and resealing, with tree cover and deck condition moving the price |
| Fastener and washer service | Starting at $650 | Replaces backed-out screws and failed washers, priced by roof size and pitch |
| Complex or large-scale repair | On estimate | Multiple damaged areas or wet decking need an on-site look before we quote |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and washer replacement | Starting at $450 | Covers diagnostic visit and replacement of a run of failed fasteners with new washers. |
| Pipe boot and small penetration reseal | Starting at $450 | Includes leak trace, boot replacement, and compatible sealant at minor penetrations. |
| Chimney or skylight flashing rebuild | Starting at $850 | Flashing removal, re-lap, and re-seal at penetrations; price moves with access and height. |
| Seam and panel repair | On estimate | Standing seam separation or panel damage needs an on-site look before pricing. |
| Emergency tarping after storm | Starting at $350 | Temporary tarp secured to stop active leaks until permanent repair can be scheduled. |
| Estimate | Free | Response within 24 hours at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers a typical residential run with failed fasteners replaced and new washers supplied, priced by count and roof access. |
| Full roof re-fastening | Starting at $1,450 | Every fastener pulled and replaced across the roof, with washer upgrade and lap check included. |
| Oversized re-fasten (stripped holes) | Starting at $1,150 | For older farmhouse and barn panels where screws have wallowed out the decking or purlin holes. |
| Mountain-home re-fasten and flashing check | On estimate | Steep wooded lots on Signal and Lookout Mountain need an on-site look for access and ice-dam damage. |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (simple gable) | Starting at $5.50/sq ft | Includes panels, underlayment, eave trim, and screws; easy ladder access keeps it near the base rate |
| R-panel or 5V ribbed roof | Starting at $6.25/sq ft | Includes ribbed panels, closures, and ridge cap; steeper pitch or longer runs move the number |
| Heavier 24-gauge panel upgrade | Starting at $7.50/sq ft | Includes premium finish and heavier gauge for exposed ridges and high-wind lots |
| Deck or purlin repair | On estimate | We open the roof first because soft framing and rot change the scope |
| Travel | Included | in Chattanooga and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (standard pitch) | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels and standard flashing; pitch and roof size move the price. |
| Slate-look or shake-look metal shingle | Starting at $11/sq ft | Heavier-gauge textured panels; complex valleys, dormers and chimneys add labor and material. |
| Metal shingle roof over existing shingles | Starting at $7/sq ft | Retrofit over sound shingles; code limits on existing layers and deck condition affect the final figure. |
| Metal shingle repair or leak fix | On estimate | Scope varies from a single flashing repair to a section replacement; needs an on-site look before pricing. |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation | Starting at $9/sq ft | Includes underlayment, panels, trim and standard flashing; pitch and roof complexity raise the rate. |
| Retrofit over existing shingles | Starting at $8/sq ft | Includes panels and trim over one sound shingle layer; deck repairs and second layers add cost. |
| Tear-off and full replacement | On estimate | Needs an on-site look at deck condition, layer count, access and disposal before pricing. |
| Flashing and chimney detail work | On estimate | Priced per penetration; chimney width, skylight count and valley length drive the number. |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper standing seam roof | Starting at $20/sq ft | Includes panels, concealed clips, underlayment and basic flashing; roof complexity and access raise the rate. |
| Zinc or terne-coated panels | Starting at $16/sq ft | Includes formed panels and soldered seams; tighter radius work and historic profiles move the price up. |
| Copper flashing and trim | Starting at $45/linear ft | Includes chimney flashing, valley liners and counterflashing; height and penetration count affect the total. |
| Custom ornamental fabrication | On estimate | Turret caps, finials and curved dormers need shop measurement and forming before a number is given. |
| Travel | Included | in Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic prep and one-coat finish | Starting at $2.50/sq ft | Includes pressure wash, light rust spot treatment, and one acrylic finish coat on an accessible roof. |
| Rust treatment and primer system | Starting at $3.75/sq ft | Adds wire-brushing, rust converter, and primer over fastener rust and edge corrosion before the finish coat. |
| Full multi-coat restoration | Starting at $5.00/sq ft | Primer, mid-coat, and finish for older panels on steep mountain homes with heavy weathering. |
| Complex or steep-access roof | On estimate | Two-story, steep-pitch, or heavily wooded lots need an on-site look for rigging and safety setup. |
| Travel | Included | in Chattanooga and surrounding areas, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (423) 275-2115, and no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight flashing repair | Starting at $600 | Includes curb inspection, new flashing and membrane, and resetting the skylight unit. |
| Chimney step flashing repair | Starting at $600 | Covers removal of old flashing and new custom-bent step flashing along one chimney wall. |
| Chimney cricket build | Starting at $1,200 | Framed and flashed cricket behind a wide chimney, priced by size and access. |
| Valley or wall transition flashing | Starting at $900 | New W-valley metal or sidewall flashing, with price driven by roof pitch and debris load. |
| Multiple penetration package | On estimate | Several chimneys, skylights, or boots on one roof need an on-site look to scope. |
| Estimate | Free | Response within 24 hours at (423) 275-2115, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic pad-style guard install | Starting at $1,200 | Covers a single roof plane with standard access and a basic guard layout over main entries. |
| Bar-style rail system | Starting at $1,850 | Steep-pitch rails above drives and walkways, priced by linear feet and eave height. |
| Clamp-on standing seam guards | Starting at $1,450 | Non-penetrating guards for standing seam, priced by panel count and roof complexity. |
| Multi-plane or high-access job | On estimate | Steep wooded lots and tall eaves need an on-site look before we quote a number. |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and fastener inspection with photos, written repair-versus-replacement assessment, no obligation |
| Minor repair (fasteners, sealant, small flashing) | Starting at $250 | Resealing seams, replacing sheared screws, and rebuilding small flashings; price moves with roof height and access |
| Panel replacement (single panel or small section) | Starting at $650 | Matching panel, substrate inspection, and re-clip; price moves with panel type, color match, and steepness |
| Fallen-tree damage repair | On estimate | Depends on tree size and species, proximity to structure, and how much panel and substrate was damaged |
| Emergency tarping and temporary seal | Starting at $300 | Same-day temporary protection to stop active leaks; credited toward the permanent repair when we do the work |
| Insurance documentation package | Included | Pre-repair and completed-work photos with written scope, provided with any repair we perform |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Covers full roof walkover, fastener and seam check, flashing review, and written photo report. |
| Insurance or storm documentation inspection | Starting at $250 | Adds measured hail and wind damage photos, claim-ready report, and adjuster follow-up support. |
| Pre-purchase roof review | Starting at $300 | Remaining service life assessment, repair cost estimate, and summary for buyers or sellers. |
| Complex or steep-access roof | On estimate | Multi-level, steep, or heavily wooded lots on the ridges need an on-site look first. |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 6-inch K-style gutter | Starting at $9/linear ft | Includes forming, hidden hangers, and standard downspouts; height and pitch move the price up |
| Oversized 7-inch with 3x4 downspouts | Starting at $14/linear ft | Higher capacity for large roof planes; mountain access and steep pitches add cost |
| Half-round copper or steel | Starting at $22/linear ft | Period-correct profile with soldered joints; historic district review may add lead time |
| Leaf guard retrofit | Starting at $6/linear ft | Micro-mesh or reverse-curve guard added to existing gutter; heavy oak canopy drives guard grade |
| Complex or large-scale job | On estimate | Multi-story, steep, or wooded-slope access needs an on-site look before we quote |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn and shop re-roof (exposed fastener) | Free estimate | Includes tear-off, new ribbed panel, and flashing; price moves with square footage and deck condition |
| Standing seam commercial roof | Starting at $14 per sq ft | Concealed fasteners and long panel runs; cost rises with pitch, height, and penetration count |
| Retrofit over existing roof | On estimate | Requires on-site check of substrate and code limits on existing layers before any number is given |
| Repair and re-fastening | Starting at $450 | Covers screw replacement, panel repair, and leak diagnosis; larger damage quoted after inspection |
| Travel | Included | In Chattanooga and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (423) 275-2115, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Chattanooga need a crew that understands how this city's weather actually behaves. Chattanooga Metal Roofing is a local metal roofing contractor serving Chattanooga and surrounding areas, from the steep wooded slopes of Signal Mountain and Lookout Mountain to the established neighborhoods of Red Bank and East Ridge. We handle metal roof installation, replacement, re-roofs, and repairs on everything from Victorian and Craftsman homes to mountain cabins and post-war brick ranches.
The housing stock here is as varied as the terrain: 1880s Queen Anne homes in Fort Wood and St. Elmo, steep-pitch mountain homes above the Tennessee River, and a large inventory of 15 to 30 year old screw-down roofs whose fasteners are reaching the end of their service life. Heavy tree cover, high-elevation exposure, and some of the heaviest rainfall in the country mean your roof has to be detailed correctly the first time. Call (423) 275-2115 or request a free estimate to get straight answers about your roof.
Most metal roof leaks in Chattanooga trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water works past the screw head and into the roof assembly. Separated seams from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are the next most common culprits. Wind-lifted panels after a storm and punctures from fallen limbs round out the list.
Ignoring a small leak is expensive. Water often tracks along purlins and decking far from the actual entry point, which means by the time you see a stain on the ceiling, the sheathing and insulation above it may already be compromised. Rot spreads, energy performance drops, and a repair that would have been minor becomes a decking replacement. That is why we inspect the whole assembly, not just the spot where water is showing up.
Our honest guidance is simple: if the panels are sound and the problem is fasteners or localized flashing, a targeted metal roof repair is usually the right call. A full screw replacement with new sealing washers often restores a watertight roof for a fraction of replacement cost. When seams are failing across the whole roof or the panels themselves are compromised, we will tell you that too. For active leaks, call (423) 275-2115 or request a free estimate and we will diagnose the cause before recommending any work.
We install the full range of metal roofing systems and match the system to the home, the pitch, and the budget. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for primary residences and steep mountain roofs. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. Metal Shingle Roofing and Stone-Coated Steel Roofing suit homes where the look of traditional roofing matters, and Copper & Specialty Metal Roofing handles accents and historic profiles.
The honest comparison: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the life of the roof. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that can save on tear-off and disposal. When the deck is not sound, a full tear-off and Metal Roof Replacement is the only responsible path. We will tell you which one your roof actually needs.
Metal roof projects in Chattanooga are typically quoted per square foot for installations, while repairs are often flat-rate. Final pricing depends on the roof and site conditions, including the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Homes on steep wooded lots atop Lookout Mountain or Signal Mountain often carry more labor and staging cost than a simple ranch in Brainerd, and that is normal. We publish typical ranges on our pricing page so you can plan before you call.
Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer and is never a promise. What we can promise is a clear written scope and an honest recommendation about repair versus replacement. Request a free estimate or a free roof inspection and we will walk the roof with you, not just hand you a number.
After storm damage, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we document is the condition of the roof: wind-lifted panels, hail impact, flashing damage, and the rest. You and your adjuster decide what happens next.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ by jurisdiction. Historic district or HOA design review can also restrict panel profile and color choices on homes in older neighborhoods. Requirements vary, so always verify with the Chattanooga building or planning department before starting your project. If you have questions about how permitting affects your timeline, contact us and we will point you in the right direction.
Ready to get started? Chattanooga Metal Roofing serves in Chattanooga and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Chattanooga · Response within 24h · No commitment · ☎ (423) 275-2115
Your Free Quote Request